Stanley 25 1/4″ x 4 1/4″ x 22″ 500 lb. Plastic Folding Sawhorse 060864R – 2/Pack

Both the transmitter and receiver are made of ABS plastic with a drop test rating of up to 6 1/2′. They are designed for indoor use only with operating temperatures of 32 to 122 degrees Fahrenheit. These tools also feature IP42 ingress protection to withstand small objects and angled water drips. The transmitter meets CATIII 600V safety standards, while the receiver meets CAT III 600V, CAT II 1000V, Class II, double insulation safety standards. This kit also includes ground prongs, outlet tabs, alligator clips, lead adapters, and AC plug leads. A convenient hard carrying case makes it easy to store and transport all of the included components.

Kit Includes:
– Transmitter
– Receiver
– 20′ lead adapter
– Hard carrying case
– AC plug to banana jacks
– Ground prongs
– (2) Outlet tabs
– (2) Alligator clips
– (2) 3′ lead adapters
– (10) AA batteries

Transmitter Dimensions:
Length: 8 3/4″
Width: 2 1/16″
Height: 1 1/2″

Receiver Dimensions:
Length: 7 1/16″
Width: 3 15/16″
Height: 1 13/16″

This cordless hammer drill driver is designed for enhanced power with a 1,650 RPM no-load speed during use. It’s designed for maximum power with up to 404 UWO and 28,050 blows per minute in hammer mode. It features a variable-speed transmission and trigger with 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with high bit retention and a 1/2″ ratcheting chuck. This tool features an onboard LED light for illumination and maximum efficiency and is ideal for concrete and masonry applications.

Kit Includes:
– Hammer drill driver
– Lithium-ion battery
– Charger
– Storage bag
– Belt hook

Tool Dimensions:
Length: 6 15/16″
Width: 2 1/2″
Height: 7 15/16″

This kit also features (1) 20V MAX XR drill driver designed for enhanced power with a variable-trigger, 2-speed (0-650 RPM / 0-2,000 RPM) transmission, and 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with no load speed, a 1/2″ keyless metal ratcheting chuck for tight bit gripping strength, and an ergonomic handle for comfort and control. For accuracy, this tool features a 3-position, 3-mode LED onboard light ring with a spotlight mode and a 20-second delay for illumination and maximum efficiency. This item is also designed with a compact tool head size and a chip pocket for Tool Connect chips for Bluetooth compatibility (sold separately).

Kit Includes:
– Drill driver
– Impact driver
– Charger
– Storage bag
– (2) Belt hooks
– (2) Lithium-ion batteries

Impact Driver Dimensions:
Length: 9 5/8″
Width: 3 7/8″
Height: 12″

Drill / Driver Dimensions:
Length: 6 3/8″
Width: 2 1/2″
Height: 8 3/16″

This hard hat includes a rechargeable, magnetic LED headlamp to illuminate your jobsite. It provides 300 lumens and up to 4 hours of use in boost mode, 215 lumens and up to 9 hours of use in spot / high mode, and 100 lumens and up to 14 hours of use in flood / low mode. A cord is included to recharge the lithium-ion battery. This hard hat also includes dual accessory mounts on the front and back and universal side slots to accept additional accessories (sold separately). It meets Type 1, Class C standards as well as ANSI/ISEA Z89.1-2014 and CSA Z94.1-15 requirements for industrial head protection.

Overall Dimensions:
Length: 12 11/16″
Width: 10 15/16″
Height: 5 13/16″

Этот беспроводной ударный гайковерт разработан для повышенной мощности с высокопроизводительным бесщеточным двигателем с крутящим моментом 1700 дюйм-фунтов до 3200 об/мин. Он также оснащен быстросъемным шестигранным патроном 1/4″. Этот инструмент оснащен курком с переменной скоростью для профессионального уровня управления и точности с 3-светодиодной встроенной подсветкой для освещения и максимальной эффективности. Этот ударный гайковерт идеально подходит для строительных и ремонтных работ, где необходимо завинчивать лопаточные биты, винты большого диаметра и крупные крепежи.

В комплект входит:
– Ударный гайковерт
– Литий-ионный аккумулятор
– Зарядное устройство
– Сумка для хранения
– Крючок для ремня

Размеры инструмента:
Длина: 11 13/16″
Ширина: 3 7/16″
Высота: 9″