Equip your toolbox with this Klein Tools refrigerant gas leak detector. This rugged tool is an ideal choice for HVAC professionals. It is light weight and portable with a storage pouch for easy transport between jobsites. This tester detects CFCs, HFCs, HCFCs, and blends. It has 2 levels of sensitivity, including a high level to detect 100 to 1,000 PPM and a low level to detect 200 to 3,000 PPM. It features automatic zero-point calibration every time you power up the unit. Plus, it has hold, mute, and low battery functions.
Klein Tools Refrigerant Gas Leak Detector ET160
$234.03
This detector is equipped with both audible and visual alarms, including 5 blue LED lights that increase with the gas concentration. It features an over-molded body for a comfortable grip, and it comes with an 18″ flexible gooseneck to expand the reach of the sensor. This gooseneck clips to the meter for convenient storage. To conserve battery life, this unit will automatically power off after 10 minutes of inactivity. It is made of durable polycarbonate, and it is drop tested for up to 6′ 6″ high. It comes with (4) AAA batteries.
Overall Dimensions:
Length: 8 1/8″
Width: 2 3/4″
Height: 1 3/4″
Ask a Question
Related products
Stanley SL18199P 12 Gallon 5 1/2 Peak hp Wet / Dry Vacuum with Tool Kit – 120V, 1 Phase
Kit Includes:
– Crevice nozzle
– Utility nozzle
– Floor brush
– Cartridge filter
– Disposable bag filter
– 6′ x 1 7/8″ hose
– (2) Extension wands
Overall Dimensions:
Length: 17 15/16″
Width: 18 3/8″
Height: 24 3/16″
Capacity: 12 gallons
Klein Tools 20:1 Infrared Digital Dual-Laser Thermometer IR10
This unit features soft-touch, over-molded plastic housing, and it is drop test rated for up to 9 13/16′. It is IP54 rated for dust and water resistance. This thermometer comes with a 9V battery, which provides up to 8 hours of continuous use with the laser and backlight on. An auto power off mode helps to conserve and extend the battery life. This tool comes complete with a convenient storage pouch.
Overall Dimensions:
Length: 7″
Width: 2 1/16″
Height: 4 1/2″
Stanley 65-Piece Homeowner’s Tool Kit 94-248
Kit Includes:
– Blow-molded carry case
– Spinner handle
– Claw hammer
– Torpedo level
– 16′ tape rule
– 18mm snap-off knife
– 1/4″ drive bit holder
– 1/4″ drive round head ratchet
– 6″ long nose pliers
– 6″ slip joint pliers
– 2-pt Phillips screwdriver
– 6.5mm flathead screwdriver
– (8) 1/4″ drive sockets
– 8 Metric hex keys
– 8 SAE hex keys
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 16″
Width: 11″
Height: 3 5/16″
Stanley 18 1/2″ x 11″ x 24 13/16″ Black / Yellow 3-in-1 Mobile Work Center / Toolbox STST18613
This mobile toolbox features 1 large bottom bin for storage of large hand and power tools (sold separately). The unit also features 1 removable toolbox with a handle and 1 removable tray with a handle for additional, portable storage with space underneath. This mobile work center is ideal for carrying larger equipment, power and hand tools, and gear (sold separately).
Overall Dimensions:
Length: 18 1/2″
Width: 11″
Height: 24 13/16″
DeWalt 20V MAX 1/2″ Variable Speed Cordless Brushless Hammer Drill Driver Kit with Rechargeable 2.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCD798D1
This cordless hammer drill driver is designed for enhanced power with a 1,650 RPM no-load speed during use. It’s designed for maximum power with up to 404 UWO and 28,050 blows per minute in hammer mode. It features a variable-speed transmission and trigger with 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with high bit retention and a 1/2″ ratcheting chuck. This tool features an onboard LED light for illumination and maximum efficiency and is ideal for concrete and masonry applications.
Kit Includes:
– Hammer drill driver
– Lithium-ion battery
– Charger
– Storage bag
– Belt hook
Tool Dimensions:
Length: 6 15/16″
Width: 2 1/2″
Height: 7 15/16″
DeWalt 20V MAX 1/4″ Cordless Brushless Impact Driver Kit with Rechargeable 2.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCF840D1
Этот беспроводной ударный гайковерт разработан для повышенной мощности с высокопроизводительным бесщеточным двигателем с крутящим моментом 1700 дюйм-фунтов до 3200 об/мин. Он также оснащен быстросъемным шестигранным патроном 1/4″. Этот инструмент оснащен курком с переменной скоростью для профессионального уровня управления и точности с 3-светодиодной встроенной подсветкой для освещения и максимальной эффективности. Этот ударный гайковерт идеально подходит для строительных и ремонтных работ, где необходимо завинчивать лопаточные биты, винты большого диаметра и крупные крепежи.
В комплект входит:
– Ударный гайковерт
– Литий-ионный аккумулятор
– Зарядное устройство
– Сумка для хранения
– Крючок для ремня
Размеры инструмента:
Длина: 11 13/16″
Ширина: 3 7/16″
Высота: 9″
Stanley FATMAX Classic 25′ Tape Measure 33-725
This tape measure is designed with large, easy-to-read markings with standard stud markers for efficient measuring and marking. It features a BladeArmor-coated hook end that protects against abrasion and heavy use for secure, accurate inside and outside measurements. It’s also designed with a belt clip for convenient carrying in between tasks.
Overall Dimensions:
Length: 25′
Width: 1 1/4″
DeWalt 20″ Yellow / Black 3-Speed 180-Degree Tilt Portable Tabletop / Hanging Industrial Drum Fan DXF2043 – 5,000 CFM, 120V
This drum fan features an adjustable, 180-degree tilting head for maximum control of ventilation and airflow. It also features a powerful blower circulator for concentrated airflow. It’s made with a 3-speed design and has durable aluminum blades. This yellow and black drum fan features a steel housing, a 6′ power cord with wraparound onboard cord storage, and requires a 120V connection. Use this fan for commercial tasks in garages, basements, and factories.
Klein Tools Wi-Fi Enabled Rechargeable Battery-Operated Thermal Imager TI270
This thermal imager offers an adjustable emissivity from 0.01 to 0.99 for accurate measurements. It features a durable ABS plastic housing, and it is drop protected up to 6′ 6″ for reliable use in the field. This model operates using a rechargeable lithium-ion battery, and it comes with a USB-C charging cable. This thermal imager includes a molded, soft storage case with a carabiner for easy, secure transport.
Overall Dimensions:
Length: 3 1/8″
Width: 1 1/16″
Height: 4 7/16″
Klein Tools Medium / Large Heavy-Duty Knee Pad Sleeves 60511
The ergonomic design has a flexible EVA knee pad with an anti-abrasion layer to contour to the shape of your leg. This unique design keeps the knee pads close to your body to fit like a second skin, allowing for maximum agility even when working in tight spaces. They also include an elastic cuff with slip-resistant silicone, ensuring they stay securely in place as you work.
Overall Dimensions:
Length: 14 5/8″
Width: 7 3/4″
Thickness: 3/4″
Klein Tools 8″ High-Leverage Diagonal Cutting Pliers D228-8
These pliers are made of forged steel with induction hardened cutting knives, ensuring long-lasting durability. The smooth, plastic-dipped handles offer comfortable use and feature a red color for easy identification. Versatile and reliable, these pliers are a great addition to any toolbox.
Stanley 1/4″-3/8″ 145-Piece Master Drive Mechanic’s Tool Set with Carrying Case STMT71653
Kit Includes:
– Blow-molded carrying case
– 1/4″ bit holder
– 1/4″ drive extension bar – 6″
– 1/4″ drive pear head ratchet
– 1/4″ spinner handle
– 3/8″ drive pear head ratchet
– 3/8″ drive 6 pt. spark plug socket – 5/8″
– 3/8″ drive extension bar – 3″
– (8) 3/8″ drive deep sockets – 6 pt.
– (8) Combination wrenches
– (10) Nut bits
– (16) SAE / Metric hex keys
– (20) 3/8″ drive sockets – 6 pt.
– (22) 1/4″ drive deep sockets – 6 pt.
– (24) 1/4″ drive sockets – 6 pt.
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 18 5/8″
Width: 12 13/16″
Height: 3 5/8″




















Reviews
There are no reviews yet.