Get guaranteed lifetime accuracy with the Milwaukee® 24-Inch REDSTICK™ Box Level. Engineered with SHARPSITE™ Vial Technology, it uses a highly-visible vial spirit for enhanced readability and accuracy. This Milwaukee precision box level delivers accuracy to 0.029 degrees, giving you straight layouts in any direction. The high-contrast vial design also allows for easy cleanup after each use. With the ALL-METAL BACKBONE™ frame, your tool withstands direct impact to maintain accuracy throughout its life. The sturdy grips on the Milwaukee bubble level ensure you’ll have optimal holding strength. Detachable end caps provide structural support while allowing you to access to narrow spaces. Ergonomic handles help provide you with ease-of-use and better portability. The tool includes a hang-hole for convenient storage between tasks.
Milwaukee 24 in. REDSTICK Box Level
$67.49
Features
- Milwaukee 24-inch RedStick box level features Sharpsite Vial Technology
- It provides accuracy to 0.029 degrees
- Cleans up fast with its high-contrast vial system
- All-Metal Backbone provides increased strength
- Integrates Amplified Rare Earth Magnets for amplified holding power
- Comes with non-slip grips to maintain surface contact
- Includes removable end caps for frame protection
- Allows easy access to restricted areas
- Wide handles provide ease of portability
- Incorporates an all-metal hang-hole for quick mounting and storage
- Limited lifetime warranty
Related products
Klein Tools K12 Series Spartan Type 1 Class C Carbon Fiber Full Brim Hard Hat with LED Headlamp 60514
This hard hat includes a rechargeable, magnetic LED headlamp to illuminate your jobsite. It provides 300 lumens and up to 4 hours of use in boost mode, 215 lumens and up to 9 hours of use in spot / high mode, and 100 lumens and up to 14 hours of use in flood / low mode. A cord is included to recharge the lithium-ion battery. This hard hat also includes dual accessory mounts on the front and back and universal side slots to accept additional accessories (sold separately). It meets Type 1, Class C standards as well as ANSI/ISEA Z89.1-2014 and CSA Z94.1-15 requirements for industrial head protection.
Overall Dimensions:
Length: 12 11/16″
Width: 10 15/16″
Height: 5 13/16″
DeWalt 20V MAX 1/4″ Cordless Brushless Impact Driver Kit with Rechargeable 2.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCF840D1
Этот беспроводной ударный гайковерт разработан для повышенной мощности с высокопроизводительным бесщеточным двигателем с крутящим моментом 1700 дюйм-фунтов до 3200 об/мин. Он также оснащен быстросъемным шестигранным патроном 1/4″. Этот инструмент оснащен курком с переменной скоростью для профессионального уровня управления и точности с 3-светодиодной встроенной подсветкой для освещения и максимальной эффективности. Этот ударный гайковерт идеально подходит для строительных и ремонтных работ, где необходимо завинчивать лопаточные биты, винты большого диаметра и крупные крепежи.
В комплект входит:
– Ударный гайковерт
– Литий-ионный аккумулятор
– Зарядное устройство
– Сумка для хранения
– Крючок для ремня
Размеры инструмента:
Длина: 11 13/16″
Ширина: 3 7/16″
Высота: 9″
DeWalt 20V MAX 6-Piece Cordless Compact Drill Driver / Impact Driver Kit with 2 Rechargeable 1.3 Ah Lithium-Ion Batteries, 1 Charger, and 1 Contractor Bag DCK240C2 – 20V
This kit also features 1 cordless drill driver designed for enhanced power with a 2-speed, 0-450 RPM / 0-1,500 RPM transmission with 16 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with a 1/2″ single-sleeve ratcheting chuck for tight bit gripping strength and an ergonomic handle for comfort and control. This set is ideal for construction and repair applications with driving tasks that include spade bits, large-diameter screws, and large fasteners.
Kit Includes:
– Drill driver
– Impact driver
– Charger
– Contractor bag
– (2) Lithium-ion batteries
Impact Driver Dimensions:
Length: 5 9/16″
Height: 8 9/16″
Drill / Driver Dimensions:
Length: 8 5/8″
Width: 2 15/16″
Height: 7 9/16″
Klein Tools Wi-Fi Enabled Rechargeable Battery-Operated Thermal Imager TI270
This thermal imager offers an adjustable emissivity from 0.01 to 0.99 for accurate measurements. It features a durable ABS plastic housing, and it is drop protected up to 6′ 6″ for reliable use in the field. This model operates using a rechargeable lithium-ion battery, and it comes with a USB-C charging cable. This thermal imager includes a molded, soft storage case with a carabiner for easy, secure transport.
Overall Dimensions:
Length: 3 1/8″
Width: 1 1/16″
Height: 4 7/16″
Klein Tools Refrigerant Gas Leak Detector ET160
This detector is equipped with both audible and visual alarms, including 5 blue LED lights that increase with the gas concentration. It features an over-molded body for a comfortable grip, and it comes with an 18″ flexible gooseneck to expand the reach of the sensor. This gooseneck clips to the meter for convenient storage. To conserve battery life, this unit will automatically power off after 10 minutes of inactivity. It is made of durable polycarbonate, and it is drop tested for up to 6′ 6″ high. It comes with (4) AAA batteries.
Overall Dimensions:
Length: 8 1/8″
Width: 2 3/4″
Height: 1 3/4″
Stanley 65-Piece Homeowner’s Tool Kit 94-248
Kit Includes:
– Blow-molded carry case
– Spinner handle
– Claw hammer
– Torpedo level
– 16′ tape rule
– 18mm snap-off knife
– 1/4″ drive bit holder
– 1/4″ drive round head ratchet
– 6″ long nose pliers
– 6″ slip joint pliers
– 2-pt Phillips screwdriver
– 6.5mm flathead screwdriver
– (8) 1/4″ drive sockets
– 8 Metric hex keys
– 8 SAE hex keys
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 16″
Width: 11″
Height: 3 5/16″
Stanley 1/4″-3/8″ 145-Piece Master Drive Mechanic’s Tool Set with Carrying Case STMT71653
Kit Includes:
– Blow-molded carrying case
– 1/4″ bit holder
– 1/4″ drive extension bar – 6″
– 1/4″ drive pear head ratchet
– 1/4″ spinner handle
– 3/8″ drive pear head ratchet
– 3/8″ drive 6 pt. spark plug socket – 5/8″
– 3/8″ drive extension bar – 3″
– (8) 3/8″ drive deep sockets – 6 pt.
– (8) Combination wrenches
– (10) Nut bits
– (16) SAE / Metric hex keys
– (20) 3/8″ drive sockets – 6 pt.
– (22) 1/4″ drive deep sockets – 6 pt.
– (24) 1/4″ drive sockets – 6 pt.
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 18 5/8″
Width: 12 13/16″
Height: 3 5/8″
Stanley Promobile 24 1/4″ x 14 13/16″ x 16 1/2″ 17 Gallon Black Mobile Contractor Tool Chest with 2 Removable Organizers 033026R
This mobile tool chest features a 17 gallon capacity to store large items with (1) 2/3 size removable, portable tray for tool storage (sold separately). It also features 1 removable organizer with a clear lid for easy access to small parts and supplies. The organizer fits snugly into the tool chest’s lid for transportation and storage. This mobile tool chest features a weight capacity of 200 lb. and is ideal for carrying larger equipment, power and hand tools, and gear (sold separately). This item is ideal for commercial home improvement, construction sites, and contractor offices.
Overall Dimensions:
Length: 24 1/4″
Width: 14 13/16″
Height: 16 1/2″
Capacity: 17 gallons
Weight Capacity: 200 lb.
Stanley SL18101P-1H 1 Gallon 1 1/2 Peak hp Wall-Mount Wet / Dry Vacuum with Tool Kit – 120V, 1 Phase
Kit Includes:
– Gulper nozzle
– Crevice nozzle
– Foam filter
– Reusable filter with clamp ring
– Wall mount with hardware
– 4′ x 1 1/4″ flexible hose
Overall Dimensions:
Diameter: 10 1/8″
Height: 11 15/16″
Capacity: 1 gallon
DeWalt 20V MAX Cordless Brushless Drill / Driver and Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, 2 Belt Hooks, and 1 Storage Bag DCK227D2
This kit also features 1 cordless impact driver with an ergonomic, compact design that makes it ideal for driving tasks in tight spaces. This item is designed for enhanced power with a high-performance brushless motor for 1,700 in. lb. of torque up to 3,200 RPM. It also features a 1/4″ hex quick-release chuck. This tool features a variable-speed trigger for professional-level control and precision with a 3-LED onboard light for illumination and maximum efficiency. It’s ideal for construction and repair applications with driving tasks that include spade bits, large-diameter screws, and large fasteners.
Kit Includes:
– Drill / driver
– Impact driver
– Charger
– Storage bag
– (2) Lithium-ion batteries
– (2) Belt hooks
Drill / Driver Dimensions:
Length: 6 7/16″
Width: 2 1/2″
Height: 7 15/16″
Impact Driver Dimensions:
Length: 11 13/16″
Width: 3 7/16″
Height: 9″
Klein Tools 8″ High-Leverage Diagonal Cutting Pliers D228-8
These pliers are made of forged steel with induction hardened cutting knives, ensuring long-lasting durability. The smooth, plastic-dipped handles offer comfortable use and feature a red color for easy identification. Versatile and reliable, these pliers are a great addition to any toolbox.
Klein Tools 12V – 1000V Non-Contact Voltage Tester Pen with Infrared Thermometer NCVT-4IR
This unit comes with (2) AAA batteries for operation, and it includes an auto power-off feature to conserve battery life. The screw-thread battery cap has an O-ring that provides a dust- and water-resistant seal to protect the batteries. This durable unit is drop tested for up to 6′ 6″. It is compact and light weight with a pocket clip for convenient storage and transport. This voltage tester pen meets CAT IV 1000V standards.
Overall Dimensions:
Length: 6 1/4″
Width: 1 1/4″
Height: 1 3/16″
Recently Viewed
Flex Seal Super Wide Duct Tape, 20 ft L, 4.6 in W, White
Key Features
- Reinforcing boxes
- General household repairs and DIY projects
- Sealing drafty windows, doors or awnings
- Tears in furniture, tents or fabric
- Temporary auto and RV repairs
- Securing cords and wires
- A/C units and duct work
- Arts and crafts and more
Reviews
There are no reviews yet.