Get guaranteed lifetime accuracy with the Milwaukee® 24-Inch REDSTICK™ Box Level. Engineered with SHARPSITE™ Vial Technology, it uses a highly-visible vial spirit for enhanced readability and accuracy. This Milwaukee precision box level delivers accuracy to 0.029 degrees, giving you straight layouts in any direction. The high-contrast vial design also allows for easy cleanup after each use. With the ALL-METAL BACKBONE™ frame, your tool withstands direct impact to maintain accuracy throughout its life. The sturdy grips on the Milwaukee bubble level ensure you’ll have optimal holding strength. Detachable end caps provide structural support while allowing you to access to narrow spaces. Ergonomic handles help provide you with ease-of-use and better portability. The tool includes a hang-hole for convenient storage between tasks.
Milwaukee 24 in. REDSTICK Box Level
$67.49
Features
- Milwaukee 24-inch RedStick box level features Sharpsite Vial Technology
- It provides accuracy to 0.029 degrees
- Cleans up fast with its high-contrast vial system
- All-Metal Backbone provides increased strength
- Integrates Amplified Rare Earth Magnets for amplified holding power
- Comes with non-slip grips to maintain surface contact
- Includes removable end caps for frame protection
- Allows easy access to restricted areas
- Wide handles provide ease of portability
- Incorporates an all-metal hang-hole for quick mounting and storage
- Limited lifetime warranty
Ask a Question
Related products
Stanley 65-Piece Homeowner’s Tool Kit 94-248
Kit Includes:
– Blow-molded carry case
– Spinner handle
– Claw hammer
– Torpedo level
– 16′ tape rule
– 18mm snap-off knife
– 1/4″ drive bit holder
– 1/4″ drive round head ratchet
– 6″ long nose pliers
– 6″ slip joint pliers
– 2-pt Phillips screwdriver
– 6.5mm flathead screwdriver
– (8) 1/4″ drive sockets
– 8 Metric hex keys
– 8 SAE hex keys
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 16″
Width: 11″
Height: 3 5/16″
Stanley 1/4″-3/8″ 145-Piece Master Drive Mechanic’s Tool Set with Carrying Case STMT71653
Kit Includes:
– Blow-molded carrying case
– 1/4″ bit holder
– 1/4″ drive extension bar – 6″
– 1/4″ drive pear head ratchet
– 1/4″ spinner handle
– 3/8″ drive pear head ratchet
– 3/8″ drive 6 pt. spark plug socket – 5/8″
– 3/8″ drive extension bar – 3″
– (8) 3/8″ drive deep sockets – 6 pt.
– (8) Combination wrenches
– (10) Nut bits
– (16) SAE / Metric hex keys
– (20) 3/8″ drive sockets – 6 pt.
– (22) 1/4″ drive deep sockets – 6 pt.
– (24) 1/4″ drive sockets – 6 pt.
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 18 5/8″
Width: 12 13/16″
Height: 3 5/8″
DeWalt 30″ Yellow / Black 3-Speed Portable Roll-Around Heavy-Duty Industrial Drum Fan DXF3080 – 8,000 CFM, 120V
This drum fan features 2 large semi-pneumatic rubber wheels with a flip-up handle for easy transport. It also features slip-resistant, nonskid feet for stability and secure placement. It’s made with a 3-speed design for maximum control of ventilation and airflow and has durable aluminum blades with a unique shape. This yellow and black drum fan features a steel body, a 12′ power cord with wraparound onboard cord storage, and it requires a 120V connection. This fan is ideal for commercial tasks in large industrial spaces.
Klein Tools Tradesman Pro 48-Pocket Tool Master Backpack 55485
This backpack features a bright orange interior, making it quick and easy to locate stored tools. It is made of heavy-duty 1680D ballistic nylon weave fabric for superior durability and water resistance, and it has a handle reinforced with aircraft cable. Its fully molded, waterproof polypropylene bottom provides optimal stability and protection from the elements. This backpack features a padded back and shoulder straps for comfortable wear. The adjustable buckled chest strap and lower straps ensure a perfect fit.
Overall Dimensions:
Length: 13 1/2″
Width: 11″
Height: 19 1/2″
Klein Tools Refrigerant Gas Leak Detector ET160
This detector is equipped with both audible and visual alarms, including 5 blue LED lights that increase with the gas concentration. It features an over-molded body for a comfortable grip, and it comes with an 18″ flexible gooseneck to expand the reach of the sensor. This gooseneck clips to the meter for convenient storage. To conserve battery life, this unit will automatically power off after 10 minutes of inactivity. It is made of durable polycarbonate, and it is drop tested for up to 6′ 6″ high. It comes with (4) AAA batteries.
Overall Dimensions:
Length: 8 1/8″
Width: 2 3/4″
Height: 1 3/4″
DeWalt 20V MAX XR 1/2″ Cordless Brushless Drill Driver Kit with Rechargeable 5.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCD800P1
This cordless drill driver is designed for high speed with a variable trigger, no load speed, and 2-speed (0-650 RPM / 0-2,000 RPM) transmission. It also features 15 clutch settings so it’s easy to select the right setting for the job at hand. This tool outputs up to 2,000 RPM when drilling wood and metal and is designed with a 1/2″ metal ratcheting chuck for high bit retention. For accuracy, this tool features a 3-position, 3-mode LED onboard light ring with a spotlight mode and a 20-second delay for illumination and maximum efficiency. This item is also designed with a chip pocket for Tool Connect chips for Bluetooth compatibility (sold separately).
Klein Tools Advanced Electrical Circuit Breaker Finder and Wire Tracer Kit ET450
Both the transmitter and receiver are made of ABS plastic with a drop test rating of up to 6 1/2′. They are designed for indoor use only with operating temperatures of 32 to 122 degrees Fahrenheit. These tools also feature IP42 ingress protection to withstand small objects and angled water drips. The transmitter meets CATIII 600V safety standards, while the receiver meets CAT III 600V, CAT II 1000V, Class II, double insulation safety standards. This kit also includes ground prongs, outlet tabs, alligator clips, lead adapters, and AC plug leads. A convenient hard carrying case makes it easy to store and transport all of the included components.
Kit Includes:
– Transmitter
– Receiver
– 20′ lead adapter
– Hard carrying case
– AC plug to banana jacks
– Ground prongs
– (2) Outlet tabs
– (2) Alligator clips
– (2) 3′ lead adapters
– (10) AA batteries
Transmitter Dimensions:
Length: 8 3/4″
Width: 2 1/16″
Height: 1 1/2″
Receiver Dimensions:
Length: 7 1/16″
Width: 3 15/16″
Height: 1 13/16″
Klein Tools Medium / Large Heavy-Duty Knee Pad Sleeves 60511
The ergonomic design has a flexible EVA knee pad with an anti-abrasion layer to contour to the shape of your leg. This unique design keeps the knee pads close to your body to fit like a second skin, allowing for maximum agility even when working in tight spaces. They also include an elastic cuff with slip-resistant silicone, ensuring they stay securely in place as you work.
Overall Dimensions:
Length: 14 5/8″
Width: 7 3/4″
Thickness: 3/4″
Klein Tools 12V – 1000V Non-Contact Voltage Tester Pen with Infrared Thermometer NCVT-4IR
This unit comes with (2) AAA batteries for operation, and it includes an auto power-off feature to conserve battery life. The screw-thread battery cap has an O-ring that provides a dust- and water-resistant seal to protect the batteries. This durable unit is drop tested for up to 6′ 6″. It is compact and light weight with a pocket clip for convenient storage and transport. This voltage tester pen meets CAT IV 1000V standards.
Overall Dimensions:
Length: 6 1/4″
Width: 1 1/4″
Height: 1 3/16″
DeWalt 20V MAX XR Cordless BrDeWalt 20V MAX XR Cordless Brushless Drill Driver and ATOMIC Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, and 1 Storage Bag DCK2051D2ushless Drill Driver and ATOMIC Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, and 1 Storage Bag DCK2051D2
This kit also features (1) 20V MAX XR drill driver designed for enhanced power with a variable-trigger, 2-speed (0-650 RPM / 0-2,000 RPM) transmission, and 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with no load speed, a 1/2″ keyless metal ratcheting chuck for tight bit gripping strength, and an ergonomic handle for comfort and control. For accuracy, this tool features a 3-position, 3-mode LED onboard light ring with a spotlight mode and a 20-second delay for illumination and maximum efficiency. This item is also designed with a compact tool head size and a chip pocket for Tool Connect chips for Bluetooth compatibility (sold separately).
Kit Includes:
– Drill driver
– Impact driver
– Charger
– Storage bag
– (2) Belt hooks
– (2) Lithium-ion batteries
Impact Driver Dimensions:
Length: 9 5/8″
Width: 3 7/8″
Height: 12″
Drill / Driver Dimensions:
Length: 6 3/8″
Width: 2 1/2″
Height: 8 3/16″
DeWalt 16″ Yellow / Black 3-Speed 360-Degree Tilt Portable Tabletop / Hanging Industrial Drum Fan DXF1616 – 4,000 CFM, 120V
This drum fan features an adjustable, 360-degree tilting head for maximum control of ventilation and airflow. It’s made with a 3-speed design and has durable aluminum blades with a unique shape. It also features a spiral front grill for concentrated airflow. This yellow and black drum fan features a polypropylene housing, a 6′ power cord with wraparound onboard cord storage, and requires a 120V connection. Use this fan for commercial tasks in garages, basements, and factories.
Stanley SL18116P 6 Gallon 4 Peak hp Wet / Dry Vacuum with Tool Kit – 120V, 1 Phase
Kit Includes:
– Gulper nozzle
– Crevice nozzle
– Reusable filter with clamp ring
– Foam filter
– Disposable dust bag
– 6′ x 1 1/4″ hose
– 10″ floor nozzle
– (2) Extension wands
Overall Dimensions:
Length: 15 7/16″
Width: 15 3/16″
Height: 21 13/16″
Capacity: 6 gallons


























Reviews
There are no reviews yet.