Ensure accurate measurements on your job site with this Stanley FATMAX Classic 25′ tape measure! This tape measurer features a 25′ blade with a reach of up to 14′ and a secure lock that won’t creep during measurements. It features a high-impact nonslip rubber case and a long-lasting blade with a protective full-tape coating.
Stanley FATMAX Classic 25′ Tape Measure 33-725
$44.02
This tape measure is designed with large, easy-to-read markings with standard stud markers for efficient measuring and marking. It features a BladeArmor-coated hook end that protects against abrasion and heavy use for secure, accurate inside and outside measurements. It’s also designed with a belt clip for convenient carrying in between tasks.
Overall Dimensions:
Length: 25′
Width: 1 1/4″
Related products
DeWalt 20″ Yellow / Black 3-Speed 180-Degree Tilt Portable Tabletop / Hanging Industrial Drum Fan DXF2043 – 5,000 CFM, 120V
This drum fan features an adjustable, 180-degree tilting head for maximum control of ventilation and airflow. It also features a powerful blower circulator for concentrated airflow. It’s made with a 3-speed design and has durable aluminum blades. This yellow and black drum fan features a steel housing, a 6′ power cord with wraparound onboard cord storage, and requires a 120V connection. Use this fan for commercial tasks in garages, basements, and factories.
Stanley 65-Piece Homeowner’s Tool Kit 94-248
Kit Includes:
– Blow-molded carry case
– Spinner handle
– Claw hammer
– Torpedo level
– 16′ tape rule
– 18mm snap-off knife
– 1/4″ drive bit holder
– 1/4″ drive round head ratchet
– 6″ long nose pliers
– 6″ slip joint pliers
– 2-pt Phillips screwdriver
– 6.5mm flathead screwdriver
– (8) 1/4″ drive sockets
– 8 Metric hex keys
– 8 SAE hex keys
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 16″
Width: 11″
Height: 3 5/16″
DeWalt 20V MAX XR Cordless BrDeWalt 20V MAX XR Cordless Brushless Drill Driver and ATOMIC Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, and 1 Storage Bag DCK2051D2ushless Drill Driver and ATOMIC Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, and 1 Storage Bag DCK2051D2
This kit also features (1) 20V MAX XR drill driver designed for enhanced power with a variable-trigger, 2-speed (0-650 RPM / 0-2,000 RPM) transmission, and 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with no load speed, a 1/2″ keyless metal ratcheting chuck for tight bit gripping strength, and an ergonomic handle for comfort and control. For accuracy, this tool features a 3-position, 3-mode LED onboard light ring with a spotlight mode and a 20-second delay for illumination and maximum efficiency. This item is also designed with a compact tool head size and a chip pocket for Tool Connect chips for Bluetooth compatibility (sold separately).
Kit Includes:
– Drill driver
– Impact driver
– Charger
– Storage bag
– (2) Belt hooks
– (2) Lithium-ion batteries
Impact Driver Dimensions:
Length: 9 5/8″
Width: 3 7/8″
Height: 12″
Drill / Driver Dimensions:
Length: 6 3/8″
Width: 2 1/2″
Height: 8 3/16″
Stanley 100′ Fiberglass Long Tape Measure 34-790
This tape measure is designed with easy-to-read markings for efficient measuring and marking. It features 2-sided graphics with fractional inch / decimal foot scales. It also features a Tru-Zero hook end for secure, accurate inside and outside measurements.
Overall Dimensions:
Length: 100′
Width: 1/2″
Klein Tools Wi-Fi Enabled Rechargeable Battery-Operated Thermal Imager TI270
This thermal imager offers an adjustable emissivity from 0.01 to 0.99 for accurate measurements. It features a durable ABS plastic housing, and it is drop protected up to 6′ 6″ for reliable use in the field. This model operates using a rechargeable lithium-ion battery, and it comes with a USB-C charging cable. This thermal imager includes a molded, soft storage case with a carabiner for easy, secure transport.
Overall Dimensions:
Length: 3 1/8″
Width: 1 1/16″
Height: 4 7/16″
Klein Tools Tradesman Pro 48-Pocket Tool Master Backpack 55485
This backpack features a bright orange interior, making it quick and easy to locate stored tools. It is made of heavy-duty 1680D ballistic nylon weave fabric for superior durability and water resistance, and it has a handle reinforced with aircraft cable. Its fully molded, waterproof polypropylene bottom provides optimal stability and protection from the elements. This backpack features a padded back and shoulder straps for comfortable wear. The adjustable buckled chest strap and lower straps ensure a perfect fit.
Overall Dimensions:
Length: 13 1/2″
Width: 11″
Height: 19 1/2″
Klein Tools 8″ High-Leverage Diagonal Cutting Pliers D228-8
These pliers are made of forged steel with induction hardened cutting knives, ensuring long-lasting durability. The smooth, plastic-dipped handles offer comfortable use and feature a red color for easy identification. Versatile and reliable, these pliers are a great addition to any toolbox.
DeWalt 20V MAX XR 1/2″ Cordless Brushless Drill Driver Kit with Rechargeable 5.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCD800P1
This cordless drill driver is designed for high speed with a variable trigger, no load speed, and 2-speed (0-650 RPM / 0-2,000 RPM) transmission. It also features 15 clutch settings so it’s easy to select the right setting for the job at hand. This tool outputs up to 2,000 RPM when drilling wood and metal and is designed with a 1/2″ metal ratcheting chuck for high bit retention. For accuracy, this tool features a 3-position, 3-mode LED onboard light ring with a spotlight mode and a 20-second delay for illumination and maximum efficiency. This item is also designed with a chip pocket for Tool Connect chips for Bluetooth compatibility (sold separately).
Klein Tools Advanced Electrical Circuit Breaker Finder and Wire Tracer Kit ET450
Both the transmitter and receiver are made of ABS plastic with a drop test rating of up to 6 1/2′. They are designed for indoor use only with operating temperatures of 32 to 122 degrees Fahrenheit. These tools also feature IP42 ingress protection to withstand small objects and angled water drips. The transmitter meets CATIII 600V safety standards, while the receiver meets CAT III 600V, CAT II 1000V, Class II, double insulation safety standards. This kit also includes ground prongs, outlet tabs, alligator clips, lead adapters, and AC plug leads. A convenient hard carrying case makes it easy to store and transport all of the included components.
Kit Includes:
– Transmitter
– Receiver
– 20′ lead adapter
– Hard carrying case
– AC plug to banana jacks
– Ground prongs
– (2) Outlet tabs
– (2) Alligator clips
– (2) 3′ lead adapters
– (10) AA batteries
Transmitter Dimensions:
Length: 8 3/4″
Width: 2 1/16″
Height: 1 1/2″
Receiver Dimensions:
Length: 7 1/16″
Width: 3 15/16″
Height: 1 13/16″
DeWalt 20V MAX 1/4″ Cordless Brushless Impact Driver Kit with Rechargeable 2.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCF840D1
Этот беспроводной ударный гайковерт разработан для повышенной мощности с высокопроизводительным бесщеточным двигателем с крутящим моментом 1700 дюйм-фунтов до 3200 об/мин. Он также оснащен быстросъемным шестигранным патроном 1/4″. Этот инструмент оснащен курком с переменной скоростью для профессионального уровня управления и точности с 3-светодиодной встроенной подсветкой для освещения и максимальной эффективности. Этот ударный гайковерт идеально подходит для строительных и ремонтных работ, где необходимо завинчивать лопаточные биты, винты большого диаметра и крупные крепежи.
В комплект входит:
– Ударный гайковерт
– Литий-ионный аккумулятор
– Зарядное устройство
– Сумка для хранения
– Крючок для ремня
Размеры инструмента:
Длина: 11 13/16″
Ширина: 3 7/16″
Высота: 9″
DeWalt 20V MAX 1/2″ Variable Speed Cordless Brushless Hammer Drill Driver Kit with Rechargeable 2.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCD798D1
This cordless hammer drill driver is designed for enhanced power with a 1,650 RPM no-load speed during use. It’s designed for maximum power with up to 404 UWO and 28,050 blows per minute in hammer mode. It features a variable-speed transmission and trigger with 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with high bit retention and a 1/2″ ratcheting chuck. This tool features an onboard LED light for illumination and maximum efficiency and is ideal for concrete and masonry applications.
Kit Includes:
– Hammer drill driver
– Lithium-ion battery
– Charger
– Storage bag
– Belt hook
Tool Dimensions:
Length: 6 15/16″
Width: 2 1/2″
Height: 7 15/16″
DeWalt 20V MAX 1/2″ Variable Speed Cordless Brushless Compact Drill / Driver Kit with Rechargeable 2.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCD793D1
This cordless drill is designed for enhanced power with a 1,650 RPM no-load speed during use. It features a 2-speed transmission with 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with high bit retention and a 1/2″ keyless, ratcheting chuck. This tool features a variable-speed trigger with forward and reverse switches for quick direction changes and an onboard LED light for illumination and maximum efficiency.
Kit Includes:
– Drill / driver
– Lithium-ion battery
– Charger
– Storage bag
– Belt hook
Tool Dimensions:
Length: 6 7/16″
Width: 2 1/2″
Height: 7 15/16″
Recently Viewed
Terro T518 Fly Magnet 8-Pack Sticky Fly Paper Trap
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Reviews
There are no reviews yet.