Inkzall jobsite markers feature clog-resistant tips and the ability to write through dusty, wet or oily surfaces. The durable marker tips are designed for writing on rough surfaces such as OSB, cinder block and concrete and the ink dries quickly to reduce smearing markings, without drying out quickly when the cap is left off. For added user convenience, the Inkzall markers have a built-in hard hat clip for easy storage and access. Inkzall markers confirm to Milwaukee’s commitment to best-in-class durability and their relentless mission to provide innovative solutions to the end user.
Milwaukee INKZALL Series 48-22-3104 Jobsite Marker, Black
$19.17
Features
- Clog-resistant marker tip
- Lanyard hole
- Non-toxic ink
- Built-in hard hat storage clip
- Ink dries in seconds
- Anti-roll body design
Related products
Klein Tools Advanced Electrical Circuit Breaker Finder and Wire Tracer Kit ET450
Both the transmitter and receiver are made of ABS plastic with a drop test rating of up to 6 1/2′. They are designed for indoor use only with operating temperatures of 32 to 122 degrees Fahrenheit. These tools also feature IP42 ingress protection to withstand small objects and angled water drips. The transmitter meets CATIII 600V safety standards, while the receiver meets CAT III 600V, CAT II 1000V, Class II, double insulation safety standards. This kit also includes ground prongs, outlet tabs, alligator clips, lead adapters, and AC plug leads. A convenient hard carrying case makes it easy to store and transport all of the included components.
Kit Includes:
– Transmitter
– Receiver
– 20′ lead adapter
– Hard carrying case
– AC plug to banana jacks
– Ground prongs
– (2) Outlet tabs
– (2) Alligator clips
– (2) 3′ lead adapters
– (10) AA batteries
Transmitter Dimensions:
Length: 8 3/4″
Width: 2 1/16″
Height: 1 1/2″
Receiver Dimensions:
Length: 7 1/16″
Width: 3 15/16″
Height: 1 13/16″
Stanley 65-Piece Homeowner’s Tool Kit 94-248
Kit Includes:
– Blow-molded carry case
– Spinner handle
– Claw hammer
– Torpedo level
– 16′ tape rule
– 18mm snap-off knife
– 1/4″ drive bit holder
– 1/4″ drive round head ratchet
– 6″ long nose pliers
– 6″ slip joint pliers
– 2-pt Phillips screwdriver
– 6.5mm flathead screwdriver
– (8) 1/4″ drive sockets
– 8 Metric hex keys
– 8 SAE hex keys
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 16″
Width: 11″
Height: 3 5/16″
DeWalt 24″ Yellow / Black Variable-Speed 360-Degree Tilt Portable Roll-Around Industrial Drum Fan DXF2491 – 6,500 CFM, 120V
This drum fan features an adjustable, 360-degree tilting head, a variable-speed design, and has durable aluminum blades with a unique shape for maximum control of ventilation and airflow. This drum fan’s all-metal heavy-duty housing is easy to assemble and take apart for convenient maintenance. This item features 2 rubber wheels with a sturdy handle for easy transport as well as slip-resistant, nonskid feet for stability and secure placement. This yellow and black drum fan features a steel body, a 12′ power cord with a 5-amp fuse for additional safety, wraparound onboard cord storage, and requires a 120V connection. This fan is ideal for commercial tasks in large industrial spaces.
Klein Tools Tradesman Pro 48-Pocket Tool Master Backpack 55485
This backpack features a bright orange interior, making it quick and easy to locate stored tools. It is made of heavy-duty 1680D ballistic nylon weave fabric for superior durability and water resistance, and it has a handle reinforced with aircraft cable. Its fully molded, waterproof polypropylene bottom provides optimal stability and protection from the elements. This backpack features a padded back and shoulder straps for comfortable wear. The adjustable buckled chest strap and lower straps ensure a perfect fit.
Overall Dimensions:
Length: 13 1/2″
Width: 11″
Height: 19 1/2″
Klein Tools 12V – 1000V Non-Contact Voltage Tester Pen with Infrared Thermometer NCVT-4IR
This unit comes with (2) AAA batteries for operation, and it includes an auto power-off feature to conserve battery life. The screw-thread battery cap has an O-ring that provides a dust- and water-resistant seal to protect the batteries. This durable unit is drop tested for up to 6′ 6″. It is compact and light weight with a pocket clip for convenient storage and transport. This voltage tester pen meets CAT IV 1000V standards.
Overall Dimensions:
Length: 6 1/4″
Width: 1 1/4″
Height: 1 3/16″
Stanley SL18199P 12 Gallon 5 1/2 Peak hp Wet / Dry Vacuum with Tool Kit – 120V, 1 Phase
Kit Includes:
– Crevice nozzle
– Utility nozzle
– Floor brush
– Cartridge filter
– Disposable bag filter
– 6′ x 1 7/8″ hose
– (2) Extension wands
Overall Dimensions:
Length: 17 15/16″
Width: 18 3/8″
Height: 24 3/16″
Capacity: 12 gallons
Stanley SL18116P 6 Gallon 4 Peak hp Wet / Dry Vacuum with Tool Kit – 120V, 1 Phase
Kit Includes:
– Gulper nozzle
– Crevice nozzle
– Reusable filter with clamp ring
– Foam filter
– Disposable dust bag
– 6′ x 1 1/4″ hose
– 10″ floor nozzle
– (2) Extension wands
Overall Dimensions:
Length: 15 7/16″
Width: 15 3/16″
Height: 21 13/16″
Capacity: 6 gallons
Stanley 18 1/2″ x 11″ x 24 13/16″ Black / Yellow 3-in-1 Mobile Work Center / Toolbox STST18613
This mobile toolbox features 1 large bottom bin for storage of large hand and power tools (sold separately). The unit also features 1 removable toolbox with a handle and 1 removable tray with a handle for additional, portable storage with space underneath. This mobile work center is ideal for carrying larger equipment, power and hand tools, and gear (sold separately).
Overall Dimensions:
Length: 18 1/2″
Width: 11″
Height: 24 13/16″
DeWalt Atomic Compact Series 20V MAX 1/2″ Variable Speed Cordless Brushless Drill / Driver Kit with Rechargeable 2.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCD794D1
This cordless drill is designed for enhanced power with a 1,650-RPM no-load speed during use. It features a 2-speed transmission with 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with high bit retention and a 1/2″ keyless, ratcheting chuck. This tool features a variable-speed trigger with forward and reverse switches for quick direction changes and an onboard LED light for illumination and maximum efficiency. This impact driver is ideal for construction and repair applications!
Kit Includes:
– Drill / driver
– Lithium-ion battery
– Charger
– Storage bag
– Belt hook
Tool Dimensions:
Length: 5 15/16″
Width: 2 1/2″
Height: 7 15/16″
DeWalt 20V MAX XR Cordless BrDeWalt 20V MAX XR Cordless Brushless Drill Driver and ATOMIC Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, and 1 Storage Bag DCK2051D2ushless Drill Driver and ATOMIC Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, and 1 Storage Bag DCK2051D2
This kit also features (1) 20V MAX XR drill driver designed for enhanced power with a variable-trigger, 2-speed (0-650 RPM / 0-2,000 RPM) transmission, and 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with no load speed, a 1/2″ keyless metal ratcheting chuck for tight bit gripping strength, and an ergonomic handle for comfort and control. For accuracy, this tool features a 3-position, 3-mode LED onboard light ring with a spotlight mode and a 20-second delay for illumination and maximum efficiency. This item is also designed with a compact tool head size and a chip pocket for Tool Connect chips for Bluetooth compatibility (sold separately).
Kit Includes:
– Drill driver
– Impact driver
– Charger
– Storage bag
– (2) Belt hooks
– (2) Lithium-ion batteries
Impact Driver Dimensions:
Length: 9 5/8″
Width: 3 7/8″
Height: 12″
Drill / Driver Dimensions:
Length: 6 3/8″
Width: 2 1/2″
Height: 8 3/16″
DeWalt 20V MAX 6-Piece Cordless Compact Drill Driver / Impact Driver Kit with 2 Rechargeable 1.3 Ah Lithium-Ion Batteries, 1 Charger, and 1 Contractor Bag DCK240C2 – 20V
This kit also features 1 cordless drill driver designed for enhanced power with a 2-speed, 0-450 RPM / 0-1,500 RPM transmission with 16 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with a 1/2″ single-sleeve ratcheting chuck for tight bit gripping strength and an ergonomic handle for comfort and control. This set is ideal for construction and repair applications with driving tasks that include spade bits, large-diameter screws, and large fasteners.
Kit Includes:
– Drill driver
– Impact driver
– Charger
– Contractor bag
– (2) Lithium-ion batteries
Impact Driver Dimensions:
Length: 5 9/16″
Height: 8 9/16″
Drill / Driver Dimensions:
Length: 8 5/8″
Width: 2 15/16″
Height: 7 9/16″
Klein Tools Wi-Fi Enabled Rechargeable Battery-Operated Thermal Imager TI270
This thermal imager offers an adjustable emissivity from 0.01 to 0.99 for accurate measurements. It features a durable ABS plastic housing, and it is drop protected up to 6′ 6″ for reliable use in the field. This model operates using a rechargeable lithium-ion battery, and it comes with a USB-C charging cable. This thermal imager includes a molded, soft storage case with a carabiner for easy, secure transport.
Overall Dimensions:
Length: 3 1/8″
Width: 1 1/16″
Height: 4 7/16″
Reviews
There are no reviews yet.