Get guaranteed lifetime accuracy with the Milwaukee® 24-Inch REDSTICK™ Box Level. Engineered with SHARPSITE™ Vial Technology, it uses a highly-visible vial spirit for enhanced readability and accuracy. This Milwaukee precision box level delivers accuracy to 0.029 degrees, giving you straight layouts in any direction. The high-contrast vial design also allows for easy cleanup after each use. With the ALL-METAL BACKBONE™ frame, your tool withstands direct impact to maintain accuracy throughout its life. The sturdy grips on the Milwaukee bubble level ensure you’ll have optimal holding strength. Detachable end caps provide structural support while allowing you to access to narrow spaces. Ergonomic handles help provide you with ease-of-use and better portability. The tool includes a hang-hole for convenient storage between tasks.
Milwaukee 24 in. REDSTICK Box Level
$67.49
Features
- Milwaukee 24-inch RedStick box level features Sharpsite Vial Technology
- It provides accuracy to 0.029 degrees
- Cleans up fast with its high-contrast vial system
- All-Metal Backbone provides increased strength
- Integrates Amplified Rare Earth Magnets for amplified holding power
- Comes with non-slip grips to maintain surface contact
- Includes removable end caps for frame protection
- Allows easy access to restricted areas
- Wide handles provide ease of portability
- Incorporates an all-metal hang-hole for quick mounting and storage
- Limited lifetime warranty
Related products
Klein Tools K12 Series Spartan Type 1 Class C Carbon Fiber Full Brim Hard Hat with LED Headlamp 60514
This hard hat includes a rechargeable, magnetic LED headlamp to illuminate your jobsite. It provides 300 lumens and up to 4 hours of use in boost mode, 215 lumens and up to 9 hours of use in spot / high mode, and 100 lumens and up to 14 hours of use in flood / low mode. A cord is included to recharge the lithium-ion battery. This hard hat also includes dual accessory mounts on the front and back and universal side slots to accept additional accessories (sold separately). It meets Type 1, Class C standards as well as ANSI/ISEA Z89.1-2014 and CSA Z94.1-15 requirements for industrial head protection.
Overall Dimensions:
Length: 12 11/16″
Width: 10 15/16″
Height: 5 13/16″
DeWalt 20″ Yellow / Black 3-Speed 180-Degree Tilt Portable Tabletop / Hanging Industrial Drum Fan DXF2043 – 5,000 CFM, 120V
This drum fan features an adjustable, 180-degree tilting head for maximum control of ventilation and airflow. It also features a powerful blower circulator for concentrated airflow. It’s made with a 3-speed design and has durable aluminum blades. This yellow and black drum fan features a steel housing, a 6′ power cord with wraparound onboard cord storage, and requires a 120V connection. Use this fan for commercial tasks in garages, basements, and factories.
Klein Tools 12V – 1000V Non-Contact Voltage Tester Pen with Infrared Thermometer NCVT-4IR
This unit comes with (2) AAA batteries for operation, and it includes an auto power-off feature to conserve battery life. The screw-thread battery cap has an O-ring that provides a dust- and water-resistant seal to protect the batteries. This durable unit is drop tested for up to 6′ 6″. It is compact and light weight with a pocket clip for convenient storage and transport. This voltage tester pen meets CAT IV 1000V standards.
Overall Dimensions:
Length: 6 1/4″
Width: 1 1/4″
Height: 1 3/16″
DeWalt 20V MAX XR 1/2″ Cordless Brushless Drill Driver Kit with Rechargeable 5.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCD800P1
This cordless drill driver is designed for high speed with a variable trigger, no load speed, and 2-speed (0-650 RPM / 0-2,000 RPM) transmission. It also features 15 clutch settings so it’s easy to select the right setting for the job at hand. This tool outputs up to 2,000 RPM when drilling wood and metal and is designed with a 1/2″ metal ratcheting chuck for high bit retention. For accuracy, this tool features a 3-position, 3-mode LED onboard light ring with a spotlight mode and a 20-second delay for illumination and maximum efficiency. This item is also designed with a chip pocket for Tool Connect chips for Bluetooth compatibility (sold separately).
DeWalt 20V MAX 6-Piece Cordless Compact Drill Driver / Impact Driver Kit with 2 Rechargeable 1.3 Ah Lithium-Ion Batteries, 1 Charger, and 1 Contractor Bag DCK240C2 – 20V
This kit also features 1 cordless drill driver designed for enhanced power with a 2-speed, 0-450 RPM / 0-1,500 RPM transmission with 16 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with a 1/2″ single-sleeve ratcheting chuck for tight bit gripping strength and an ergonomic handle for comfort and control. This set is ideal for construction and repair applications with driving tasks that include spade bits, large-diameter screws, and large fasteners.
Kit Includes:
– Drill driver
– Impact driver
– Charger
– Contractor bag
– (2) Lithium-ion batteries
Impact Driver Dimensions:
Length: 5 9/16″
Height: 8 9/16″
Drill / Driver Dimensions:
Length: 8 5/8″
Width: 2 15/16″
Height: 7 9/16″
DeWalt 20V MAX 1/2″ Variable Speed Cordless Brushless Hammer Drill Driver Kit with Rechargeable 2.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCD798D1
This cordless hammer drill driver is designed for enhanced power with a 1,650 RPM no-load speed during use. It’s designed for maximum power with up to 404 UWO and 28,050 blows per minute in hammer mode. It features a variable-speed transmission and trigger with 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with high bit retention and a 1/2″ ratcheting chuck. This tool features an onboard LED light for illumination and maximum efficiency and is ideal for concrete and masonry applications.
Kit Includes:
– Hammer drill driver
– Lithium-ion battery
– Charger
– Storage bag
– Belt hook
Tool Dimensions:
Length: 6 15/16″
Width: 2 1/2″
Height: 7 15/16″
Stanley 65-Piece Homeowner’s Tool Kit 94-248
Kit Includes:
– Blow-molded carry case
– Spinner handle
– Claw hammer
– Torpedo level
– 16′ tape rule
– 18mm snap-off knife
– 1/4″ drive bit holder
– 1/4″ drive round head ratchet
– 6″ long nose pliers
– 6″ slip joint pliers
– 2-pt Phillips screwdriver
– 6.5mm flathead screwdriver
– (8) 1/4″ drive sockets
– 8 Metric hex keys
– 8 SAE hex keys
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 16″
Width: 11″
Height: 3 5/16″
DeWalt 20V MAX XR 1/4″ 3-Speed Cordless Brushless Impact Driver with Belt Hook DCF845B
This cordless impact driver is designed with a 3-speed transmission and a variable-speed trigger for precision and control. It’s designed with a 1/4″ chuck and an integrated 3-LED onboard light for illumination and maximum efficiency. This item is also designed with a chip pocket for Tool Connect chips for Bluetooth compatibility and is compatible with select DeWalt lithium-ion batteries and chargers (sold separately).
DeWalt 24″ Yellow / Black Variable-Speed 360-Degree Tilt Portable Roll-Around Industrial Drum Fan DXF2491 – 6,500 CFM, 120V
This drum fan features an adjustable, 360-degree tilting head, a variable-speed design, and has durable aluminum blades with a unique shape for maximum control of ventilation and airflow. This drum fan’s all-metal heavy-duty housing is easy to assemble and take apart for convenient maintenance. This item features 2 rubber wheels with a sturdy handle for easy transport as well as slip-resistant, nonskid feet for stability and secure placement. This yellow and black drum fan features a steel body, a 12′ power cord with a 5-amp fuse for additional safety, wraparound onboard cord storage, and requires a 120V connection. This fan is ideal for commercial tasks in large industrial spaces.
Klein Tools 28-Piece Tool Kit 80028
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Stanley FATMAX Classic 25′ Tape Measure 33-725
This tape measure is designed with large, easy-to-read markings with standard stud markers for efficient measuring and marking. It features a BladeArmor-coated hook end that protects against abrasion and heavy use for secure, accurate inside and outside measurements. It’s also designed with a belt clip for convenient carrying in between tasks.
Overall Dimensions:
Length: 25′
Width: 1 1/4″
Klein Tools Tradesman Pro 48-Pocket Tool Master Backpack 55485
This backpack features a bright orange interior, making it quick and easy to locate stored tools. It is made of heavy-duty 1680D ballistic nylon weave fabric for superior durability and water resistance, and it has a handle reinforced with aircraft cable. Its fully molded, waterproof polypropylene bottom provides optimal stability and protection from the elements. This backpack features a padded back and shoulder straps for comfortable wear. The adjustable buckled chest strap and lower straps ensure a perfect fit.
Overall Dimensions:
Length: 13 1/2″
Width: 11″
Height: 19 1/2″
Recently Viewed
GRK FASTENERS 12225 RSS 5/16″ x 4″ SCREWS 100CT
- Easy to install lag alternative for structural wood to wood fastening
- Code approved for structural wood to wood applications
- For interior/exterior use
- Fast Bite Tip provides a fast start for one-step installation
Lambro 4 In. White Plastic Universal Hinged Vent Guard Model 1491wg
This vent guard is ideal for use in residential settings, particularly for dryer, range, and bath vents. It effectively keeps out birds, rodents, and other pests, ensuring that your ventilation system remains clear and functional. Perfect for both new installations and replacements, the Lambro Universal Hinged Vent Guard is a must-have for any homeowner looking to enhance their home’s ventilation system.
Reviews
There are no reviews yet.