Klein Tools Refrigerant Gas Leak Detector ET160

This unit comes with (2) AAA batteries for operation, and it includes an auto power-off feature to conserve battery life. The screw-thread battery cap has an O-ring that provides a dust- and water-resistant seal to protect the batteries. This durable unit is drop tested for up to 6′ 6″. It is compact and light weight with a pocket clip for convenient storage and transport. This voltage tester pen meets CAT IV 1000V standards.

Overall Dimensions:
Length: 6 1/4″
Width: 1 1/4″
Height: 1 3/16″

This kit also features 1 cordless drill driver designed for enhanced power with a 2-speed, 0-450 RPM / 0-1,500 RPM transmission with 16 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with a 1/2″ single-sleeve ratcheting chuck for tight bit gripping strength and an ergonomic handle for comfort and control. This set is ideal for construction and repair applications with driving tasks that include spade bits, large-diameter screws, and large fasteners.

Kit Includes:
– Drill driver
– Impact driver
– Charger
– Contractor bag
– (2) Lithium-ion batteries

Impact Driver Dimensions:
Length: 5 9/16″
Height: 8 9/16″

Drill / Driver Dimensions:
Length: 8 5/8″
Width: 2 15/16″
Height: 7 9/16″

This kit also features (1) 20V MAX XR drill driver designed for enhanced power with a variable-trigger, 2-speed (0-650 RPM / 0-2,000 RPM) transmission, and 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with no load speed, a 1/2″ keyless metal ratcheting chuck for tight bit gripping strength, and an ergonomic handle for comfort and control. For accuracy, this tool features a 3-position, 3-mode LED onboard light ring with a spotlight mode and a 20-second delay for illumination and maximum efficiency. This item is also designed with a compact tool head size and a chip pocket for Tool Connect chips for Bluetooth compatibility (sold separately).

Kit Includes:
– Drill driver
– Impact driver
– Charger
– Storage bag
– (2) Belt hooks
– (2) Lithium-ion batteries

Impact Driver Dimensions:
Length: 9 5/8″
Width: 3 7/8″
Height: 12″

Drill / Driver Dimensions:
Length: 6 3/8″
Width: 2 1/2″
Height: 8 3/16″

Этот беспроводной ударный гайковерт разработан для повышенной мощности с высокопроизводительным бесщеточным двигателем с крутящим моментом 1700 дюйм-фунтов до 3200 об/мин. Он также оснащен быстросъемным шестигранным патроном 1/4″. Этот инструмент оснащен курком с переменной скоростью для профессионального уровня управления и точности с 3-светодиодной встроенной подсветкой для освещения и максимальной эффективности. Этот ударный гайковерт идеально подходит для строительных и ремонтных работ, где необходимо завинчивать лопаточные биты, винты большого диаметра и крупные крепежи.

В комплект входит:
– Ударный гайковерт
– Литий-ионный аккумулятор
– Зарядное устройство
– Сумка для хранения
– Крючок для ремня

Размеры инструмента:
Длина: 11 13/16″
Ширина: 3 7/16″
Высота: 9″

Kit Includes:
– Gulper nozzle
– Crevice nozzle
– Foam filter
– Reusable filter with clamp ring
– Wall mount with hardware
– 4′ x 1 1/4″ flexible hose

Overall Dimensions:
Diameter: 10 1/8″
Height: 11 15/16″
Capacity: 1 gallon

Both the transmitter and receiver are made of ABS plastic with a drop test rating of up to 6 1/2′. They are designed for indoor use only with operating temperatures of 32 to 122 degrees Fahrenheit. These tools also feature IP42 ingress protection to withstand small objects and angled water drips. The transmitter meets CATIII 600V safety standards, while the receiver meets CAT III 600V, CAT II 1000V, Class II, double insulation safety standards. This kit also includes ground prongs, outlet tabs, alligator clips, lead adapters, and AC plug leads. A convenient hard carrying case makes it easy to store and transport all of the included components.

Kit Includes:
– Transmitter
– Receiver
– 20′ lead adapter
– Hard carrying case
– AC plug to banana jacks
– Ground prongs
– (2) Outlet tabs
– (2) Alligator clips
– (2) 3′ lead adapters
– (10) AA batteries

Transmitter Dimensions:
Length: 8 3/4″
Width: 2 1/16″
Height: 1 1/2″

Receiver Dimensions:
Length: 7 1/16″
Width: 3 15/16″
Height: 1 13/16″