GRK RSS Rugged Structural Screw is a structural fastener designed for ease of installation and the strongest of connections. With proprietary features like the Zip-Tip, and W-Cut thread, RSS fasteners drive into most woods without the need for pre-drilling. The specially engineered design results in a low-effort installation, especially compared to conventional lag screws. RSS Rugged Structural Screws have a Climatek Coating for installation in both interior and exterior conditions where exposure to moisture is intermittent and is code-approved for use in treated lumber.










GRK 5/16″ x 2-1/2″ 10217 RSS Rugged Structural Screws 600 Count, Gold
$234.74 $246.50
About this item
- Easy to install lag alternative for structural wood to wood fastening
- Code approved for structural wood to wood applications
- For interior/exterior use
- Fast Bite Tip provides a fast start for one-step installation
Related products
DeWalt 20V MAX 6-Piece Cordless Compact Drill Driver / Impact Driver Kit with 2 Rechargeable 1.3 Ah Lithium-Ion Batteries, 1 Charger, and 1 Contractor Bag DCK240C2 – 20V
This kit also features 1 cordless drill driver designed for enhanced power with a 2-speed, 0-450 RPM / 0-1,500 RPM transmission with 16 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with a 1/2″ single-sleeve ratcheting chuck for tight bit gripping strength and an ergonomic handle for comfort and control. This set is ideal for construction and repair applications with driving tasks that include spade bits, large-diameter screws, and large fasteners.
Kit Includes:
– Drill driver
– Impact driver
– Charger
– Contractor bag
– (2) Lithium-ion batteries
Impact Driver Dimensions:
Length: 5 9/16″
Height: 8 9/16″
Drill / Driver Dimensions:
Length: 8 5/8″
Width: 2 15/16″
Height: 7 9/16″
Stanley SL18101P-1H 1 Gallon 1 1/2 Peak hp Wall-Mount Wet / Dry Vacuum with Tool Kit – 120V, 1 Phase
Kit Includes:
– Gulper nozzle
– Crevice nozzle
– Foam filter
– Reusable filter with clamp ring
– Wall mount with hardware
– 4′ x 1 1/4″ flexible hose
Overall Dimensions:
Diameter: 10 1/8″
Height: 11 15/16″
Capacity: 1 gallon
DeWalt 20″ Yellow / Black 3-Speed 180-Degree Tilt Portable Tabletop / Hanging Industrial Drum Fan DXF2043 – 5,000 CFM, 120V
This drum fan features an adjustable, 180-degree tilting head for maximum control of ventilation and airflow. It also features a powerful blower circulator for concentrated airflow. It’s made with a 3-speed design and has durable aluminum blades. This yellow and black drum fan features a steel housing, a 6′ power cord with wraparound onboard cord storage, and requires a 120V connection. Use this fan for commercial tasks in garages, basements, and factories.
DeWalt 20V MAX XR Cordless BrDeWalt 20V MAX XR Cordless Brushless Drill Driver and ATOMIC Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, and 1 Storage Bag DCK2051D2ushless Drill Driver and ATOMIC Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, and 1 Storage Bag DCK2051D2
This kit also features (1) 20V MAX XR drill driver designed for enhanced power with a variable-trigger, 2-speed (0-650 RPM / 0-2,000 RPM) transmission, and 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with no load speed, a 1/2″ keyless metal ratcheting chuck for tight bit gripping strength, and an ergonomic handle for comfort and control. For accuracy, this tool features a 3-position, 3-mode LED onboard light ring with a spotlight mode and a 20-second delay for illumination and maximum efficiency. This item is also designed with a compact tool head size and a chip pocket for Tool Connect chips for Bluetooth compatibility (sold separately).
Kit Includes:
– Drill driver
– Impact driver
– Charger
– Storage bag
– (2) Belt hooks
– (2) Lithium-ion batteries
Impact Driver Dimensions:
Length: 9 5/8″
Width: 3 7/8″
Height: 12″
Drill / Driver Dimensions:
Length: 6 3/8″
Width: 2 1/2″
Height: 8 3/16″
Stanley SL18199P 12 Gallon 5 1/2 Peak hp Wet / Dry Vacuum with Tool Kit – 120V, 1 Phase
Kit Includes:
– Crevice nozzle
– Utility nozzle
– Floor brush
– Cartridge filter
– Disposable bag filter
– 6′ x 1 7/8″ hose
– (2) Extension wands
Overall Dimensions:
Length: 17 15/16″
Width: 18 3/8″
Height: 24 3/16″
Capacity: 12 gallons
Klein Tools Medium / Large Heavy-Duty Knee Pad Sleeves 60511
The ergonomic design has a flexible EVA knee pad with an anti-abrasion layer to contour to the shape of your leg. This unique design keeps the knee pads close to your body to fit like a second skin, allowing for maximum agility even when working in tight spaces. They also include an elastic cuff with slip-resistant silicone, ensuring they stay securely in place as you work.
Overall Dimensions:
Length: 14 5/8″
Width: 7 3/4″
Thickness: 3/4″
DeWalt 20V MAX Cordless Brushless Drill / Driver and Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, 2 Belt Hooks, and 1 Storage Bag DCK227D2
This kit also features 1 cordless impact driver with an ergonomic, compact design that makes it ideal for driving tasks in tight spaces. This item is designed for enhanced power with a high-performance brushless motor for 1,700 in. lb. of torque up to 3,200 RPM. It also features a 1/4″ hex quick-release chuck. This tool features a variable-speed trigger for professional-level control and precision with a 3-LED onboard light for illumination and maximum efficiency. It’s ideal for construction and repair applications with driving tasks that include spade bits, large-diameter screws, and large fasteners.
Kit Includes:
– Drill / driver
– Impact driver
– Charger
– Storage bag
– (2) Lithium-ion batteries
– (2) Belt hooks
Drill / Driver Dimensions:
Length: 6 7/16″
Width: 2 1/2″
Height: 7 15/16″
Impact Driver Dimensions:
Length: 11 13/16″
Width: 3 7/16″
Height: 9″
Klein Tools Tradesman Pro 48-Pocket Tool Master Backpack 55485
This backpack features a bright orange interior, making it quick and easy to locate stored tools. It is made of heavy-duty 1680D ballistic nylon weave fabric for superior durability and water resistance, and it has a handle reinforced with aircraft cable. Its fully molded, waterproof polypropylene bottom provides optimal stability and protection from the elements. This backpack features a padded back and shoulder straps for comfortable wear. The adjustable buckled chest strap and lower straps ensure a perfect fit.
Overall Dimensions:
Length: 13 1/2″
Width: 11″
Height: 19 1/2″
DeWalt 20V MAX XR 1/4″ 3-Speed Cordless Brushless Impact Driver with Belt Hook DCF845B
This cordless impact driver is designed with a 3-speed transmission and a variable-speed trigger for precision and control. It’s designed with a 1/4″ chuck and an integrated 3-LED onboard light for illumination and maximum efficiency. This item is also designed with a chip pocket for Tool Connect chips for Bluetooth compatibility and is compatible with select DeWalt lithium-ion batteries and chargers (sold separately).
Klein Tools 12V – 1000V Non-Contact Voltage Tester Pen with Infrared Thermometer NCVT-4IR
This unit comes with (2) AAA batteries for operation, and it includes an auto power-off feature to conserve battery life. The screw-thread battery cap has an O-ring that provides a dust- and water-resistant seal to protect the batteries. This durable unit is drop tested for up to 6′ 6″. It is compact and light weight with a pocket clip for convenient storage and transport. This voltage tester pen meets CAT IV 1000V standards.
Overall Dimensions:
Length: 6 1/4″
Width: 1 1/4″
Height: 1 3/16″
Stanley 65-Piece Homeowner’s Tool Kit 94-248
Kit Includes:
– Blow-molded carry case
– Spinner handle
– Claw hammer
– Torpedo level
– 16′ tape rule
– 18mm snap-off knife
– 1/4″ drive bit holder
– 1/4″ drive round head ratchet
– 6″ long nose pliers
– 6″ slip joint pliers
– 2-pt Phillips screwdriver
– 6.5mm flathead screwdriver
– (8) 1/4″ drive sockets
– 8 Metric hex keys
– 8 SAE hex keys
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 16″
Width: 11″
Height: 3 5/16″
Stanley 1/4″-3/8″ 145-Piece Master Drive Mechanic’s Tool Set with Carrying Case STMT71653
Kit Includes:
– Blow-molded carrying case
– 1/4″ bit holder
– 1/4″ drive extension bar – 6″
– 1/4″ drive pear head ratchet
– 1/4″ spinner handle
– 3/8″ drive pear head ratchet
– 3/8″ drive 6 pt. spark plug socket – 5/8″
– 3/8″ drive extension bar – 3″
– (8) 3/8″ drive deep sockets – 6 pt.
– (8) Combination wrenches
– (10) Nut bits
– (16) SAE / Metric hex keys
– (20) 3/8″ drive sockets – 6 pt.
– (22) 1/4″ drive deep sockets – 6 pt.
– (24) 1/4″ drive sockets – 6 pt.
– (30) 1/4″ drive specialty bits
Overall Dimensions:
Length: 18 5/8″
Width: 12 13/16″
Height: 3 5/8″
Recently Viewed
Seventh Generation 10732913449306 Free & Clear 80-Count Fabric Softener Sheets – 4/Case
The fragrance-free formula ensures that your clothes are free from artificial scents, making them ideal for those with sensitivities or allergies. These dermatologist-tested fabric softener sheets are safe for most skin types, providing a worry-free laundry experience for you and your family. Whether you’re washing your everyday essentials or delicate fabrics, these sheets provide a gentle touch that helps maintain the integrity of your garments.
Husky HK18XDS050W Trash Compactor Bag with Drawstring, 18 gal Capacity, White, 2 ft 1-5/8 in L, 2 ft 4 in W
Husky® Trash Compactor Bag – 18 Gallon with Drawstring
• Built for compactors – durable and tear-resistant
• 18-gallon capacity for heavy loads
• Strong drawstring closure for easy handling
• Clean white design – great for kitchens
• 2 ft 1-5/8 in L × 2 ft 4 in W – fits most compactor bins
DeWalt DWHT70264 Durable & Ergonomic Design Folding Locking Torx Hex Key Set
This set’s patented locking mechanism ensures the keys stay securely in place during use, reducing the risk of slippage and enhancing user safety. The foldable design allows for easy storage and transport, making it a convenient addition to any toolbox
Color: Multi
Brand: DEWALT
Material: Blend
Item Weight: 9.6 Ounces
Item Package Quantity: 1
Fiskars 1539001006 8″ Non-Stick Titanium Pointed Tip Office Scissors with Orange / Gray Bent Softgrip Handle
Featuring a Softgrip handle, users will experience less hand fatigue during use which is great for long, tedious tasks in schools or offices. The bent handle also allows for better control to ensure accuracy throughout every task. Plus, with long straight blades these scissors boast a 3 1/8″ cut length! The non-stick coating on the blades makes it easy to cut cleanly through materials with sticky adhesives and also helps reduce residue build-up over time to keep them working like new. Use these scissors to cut through a variety of items from piles of papers to fabrics in your commercial or office setting.
Overall Dimensions:
Length: 8″
Blade Length: 3 1/8″
Pyrex Easy Grab 4-piece Rectangular Glass Bakeware Set with Red Lids
- Easy-grab handles for a comfortable, sure grip
- Durable high-quality tempered glass for even heating
- Dishes are dishwasher, freezer, microwave and preheated-oven safe
- Dishes resist stains and do not absorb food odors or flavors
- Storage dishes easily nest and stack with other Pyrex® storage
- Secure-fit lid design lets you access handles when lid is attached
- BPA-free plastic lids are top-rack dishwasher, freezer and microwave safe
- 2-year limited warranty on glass and plastic lids
DeWalt 20V MAX Cordless Brushless Drill / Driver and Impact Driver Kit with 2 Rechargeable 2.0 Ah Lithium-Ion Batteries, 1 Charger, 2 Belt Hooks, and 1 Storage Bag DCK227D2
This kit also features 1 cordless impact driver with an ergonomic, compact design that makes it ideal for driving tasks in tight spaces. This item is designed for enhanced power with a high-performance brushless motor for 1,700 in. lb. of torque up to 3,200 RPM. It also features a 1/4″ hex quick-release chuck. This tool features a variable-speed trigger for professional-level control and precision with a 3-LED onboard light for illumination and maximum efficiency. It’s ideal for construction and repair applications with driving tasks that include spade bits, large-diameter screws, and large fasteners.
Kit Includes:
– Drill / driver
– Impact driver
– Charger
– Storage bag
– (2) Lithium-ion batteries
– (2) Belt hooks
Drill / Driver Dimensions:
Length: 6 7/16″
Width: 2 1/2″
Height: 7 15/16″
Impact Driver Dimensions:
Length: 11 13/16″
Width: 3 7/16″
Height: 9″
Makita 36V (18V X2) LXT 18″ Brushless Cordless Lawn Mower Kit with (4) 4.0 Ah Lithium-Ion Batteries and Dual-Port Charger XML03CM1
This lawn mower includes (4) 18V LXT lithium-ion 4.0 Ah batteries and 1 dual-port charger. The batteries feature impact-resistant outer cases and shock-absorbing inner liners that are engineered to protect the batteries and ensure they remain securely attached to the mower. They also feature LED charge level indicators. The charger allows the batteries to reach a full charge in just 40 minutes. This item is only for use with Makita batteries and chargers.
Reviews
There are no reviews yet.