DeWalt 20V MAX XR 1/2″ Cordless Brushless Drill Driver Kit with Rechargeable 5.0 Ah Lithium-Ion Battery, Charger, and Storage Bag DCD800P1

This hard hat includes a rechargeable, magnetic LED headlamp to illuminate your jobsite. It provides 300 lumens and up to 4 hours of use in boost mode, 215 lumens and up to 9 hours of use in spot / high mode, and 100 lumens and up to 14 hours of use in flood / low mode. A cord is included to recharge the lithium-ion battery. This hard hat also includes dual accessory mounts on the front and back and universal side slots to accept additional accessories (sold separately). It meets Type 1, Class C standards as well as ANSI/ISEA Z89.1-2014 and CSA Z94.1-15 requirements for industrial head protection.

Overall Dimensions:
Length: 12 11/16″
Width: 10 15/16″
Height: 5 13/16″

Kit Includes:
– Gulper nozzle
– Crevice nozzle
– Reusable filter with clamp ring
– Foam filter
– Disposable dust bag
– 6′ x 1 1/4″ hose
– 10″ floor nozzle
– (2) Extension wands

Overall Dimensions:
Length: 15 7/16″
Width: 15 3/16″
Height: 21 13/16″
Capacity: 6 gallons

This unit features soft-touch, over-molded plastic housing, and it is drop test rated for up to 9 13/16′. It is IP54 rated for dust and water resistance. This thermometer comes with a 9V battery, which provides up to 8 hours of continuous use with the laser and backlight on. An auto power off mode helps to conserve and extend the battery life. This tool comes complete with a convenient storage pouch.

Overall Dimensions:
Length: 7″
Width: 2 1/16″
Height: 4 1/2″

This kit also features 1 cordless drill driver designed for enhanced power with a 2-speed, 0-450 RPM / 0-1,500 RPM transmission with 16 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with a 1/2″ single-sleeve ratcheting chuck for tight bit gripping strength and an ergonomic handle for comfort and control. This set is ideal for construction and repair applications with driving tasks that include spade bits, large-diameter screws, and large fasteners.

Kit Includes:
– Drill driver
– Impact driver
– Charger
– Contractor bag
– (2) Lithium-ion batteries

Impact Driver Dimensions:
Length: 5 9/16″
Height: 8 9/16″

Drill / Driver Dimensions:
Length: 8 5/8″
Width: 2 15/16″
Height: 7 9/16″

This kit also features 1 cordless impact driver with an ergonomic, compact design that makes it ideal for driving tasks in tight spaces. This item is designed for enhanced power with a high-performance brushless motor for 1,700 in. lb. of torque up to 3,200 RPM. It also features a 1/4″ hex quick-release chuck. This tool features a variable-speed trigger for professional-level control and precision with a 3-LED onboard light for illumination and maximum efficiency. It’s ideal for construction and repair applications with driving tasks that include spade bits, large-diameter screws, and large fasteners.

Kit Includes:
– Drill / driver
– Impact driver
– Charger
– Storage bag
– (2) Lithium-ion batteries
– (2) Belt hooks

Drill / Driver Dimensions:
Length: 6 7/16″
Width: 2 1/2″
Height: 7 15/16″

Impact Driver Dimensions:
Length: 11 13/16″
Width: 3 7/16″
Height: 9″

This thermal imager offers an adjustable emissivity from 0.01 to 0.99 for accurate measurements. It features a durable ABS plastic housing, and it is drop protected up to 6′ 6″ for reliable use in the field. This model operates using a rechargeable lithium-ion battery, and it comes with a USB-C charging cable. This thermal imager includes a molded, soft storage case with a carabiner for easy, secure transport.

Overall Dimensions:
Length: 3 1/8″
Width: 1 1/16″
Height: 4 7/16″