FISKARS 375501-1001 Hatchet Axe, 1.4375 lb Head, Steel Head, Fiberglass Handle, 14 in OAL

This unit comes with (2) AAA batteries for operation, and it includes an auto power-off feature to conserve battery life. The screw-thread battery cap has an O-ring that provides a dust- and water-resistant seal to protect the batteries. This durable unit is drop tested for up to 6′ 6″. It is compact and light weight with a pocket clip for convenient storage and transport. This voltage tester pen meets CAT IV 1000V standards.

Overall Dimensions:
Length: 6 1/4″
Width: 1 1/4″
Height: 1 3/16″

This cordless hammer drill driver is designed for enhanced power with a 1,650 RPM no-load speed during use. It’s designed for maximum power with up to 404 UWO and 28,050 blows per minute in hammer mode. It features a variable-speed transmission and trigger with 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with high bit retention and a 1/2″ ratcheting chuck. This tool features an onboard LED light for illumination and maximum efficiency and is ideal for concrete and masonry applications.

Kit Includes:
– Hammer drill driver
– Lithium-ion battery
– Charger
– Storage bag
– Belt hook

Tool Dimensions:
Length: 6 15/16″
Width: 2 1/2″
Height: 7 15/16″

This unit features soft-touch, over-molded plastic housing, and it is drop test rated for up to 9 13/16′. It is IP54 rated for dust and water resistance. This thermometer comes with a 9V battery, which provides up to 8 hours of continuous use with the laser and backlight on. An auto power off mode helps to conserve and extend the battery life. This tool comes complete with a convenient storage pouch.

Overall Dimensions:
Length: 7″
Width: 2 1/16″
Height: 4 1/2″

This hard hat includes a rechargeable, magnetic LED headlamp to illuminate your jobsite. It provides 300 lumens and up to 4 hours of use in boost mode, 215 lumens and up to 9 hours of use in spot / high mode, and 100 lumens and up to 14 hours of use in flood / low mode. A cord is included to recharge the lithium-ion battery. This hard hat also includes dual accessory mounts on the front and back and universal side slots to accept additional accessories (sold separately). It meets Type 1, Class C standards as well as ANSI/ISEA Z89.1-2014 and CSA Z94.1-15 requirements for industrial head protection.

Overall Dimensions:
Length: 12 11/16″
Width: 10 15/16″
Height: 5 13/16″

This cordless drill is designed for enhanced power with a 1,650 RPM no-load speed during use. It features a 2-speed transmission with 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with high bit retention and a 1/2″ keyless, ratcheting chuck. This tool features a variable-speed trigger with forward and reverse switches for quick direction changes and an onboard LED light for illumination and maximum efficiency.

Kit Includes:
– Drill / driver
– Lithium-ion battery
– Charger
– Storage bag
– Belt hook

Tool Dimensions:
Length: 6 7/16″
Width: 2 1/2″
Height: 7 15/16″

This kit also features (1) 20V MAX XR drill driver designed for enhanced power with a variable-trigger, 2-speed (0-650 RPM / 0-2,000 RPM) transmission, and 15 clutch settings so it’s easy to select the right setting for the job at hand. It’s also designed with no load speed, a 1/2″ keyless metal ratcheting chuck for tight bit gripping strength, and an ergonomic handle for comfort and control. For accuracy, this tool features a 3-position, 3-mode LED onboard light ring with a spotlight mode and a 20-second delay for illumination and maximum efficiency. This item is also designed with a compact tool head size and a chip pocket for Tool Connect chips for Bluetooth compatibility (sold separately).

Kit Includes:
– Drill driver
– Impact driver
– Charger
– Storage bag
– (2) Belt hooks
– (2) Lithium-ion batteries

Impact Driver Dimensions:
Length: 9 5/8″
Width: 3 7/8″
Height: 12″

Drill / Driver Dimensions:
Length: 6 3/8″
Width: 2 1/2″
Height: 8 3/16″